Dump Truck - Mobile On-Road - Applications

THE LUBRICATION SOLUTION
FOR DUMP TRUCKS

THE LUBRICATION
SOLUTION FOR
DUMP TRUCKS

Whether you own or lease the equipment, proper maintenance pays off for everyone. The most common bearing failure is a damaged grease seal due to over pressurization while manually greasing. An automatic lubrication system minimizes pressure and provides metered grease to all points while your equipment is in operation. When all bearings are properly lubricated, you can expect an extended service life of your equipment and avoid unexpected costly repairs and downtime. Tired of crawling under or over equipment to service hard-to-reach lubrication points? Our automatic system takes care of the work for you.

Need help implementing an automatic system? Contact an expert.

Need help implementing an automatic system?
Contact an expert.

FEATURES & BENEFITS

The system greases every point while the dump truck is in operation and maintains a constant barrier at bushings preventing dust and dirt from entering wear surfaces.
Increased safety as there is no need to crawl under or over equipment to service hard-to-reach lubrication points.
Adding an automatic lubrication system increases equipment life by decreasing wear on vital components.
Gain 30 minutes or more of operating time per day with an R.O.I. of less than 12 months.

FEATURES & BENEFITS

The system greases every point while the dump truck is in operation and maintains a constant barrier at bushings preventing dust and dirt from entering wear surfaces.
Increased safety as there is no need to crawl under or over equipment to service hard-to-reach lubrication points.
Adding an automatic lubrication system increases equipment life by decreasing wear on vital components.
Gain 30 minutes or more of operating time per day with an R.O.I. of less than 12 months.

FEATURES & BENEFITS

The system greases every point while the dump truck is in operation and maintains a constant barrier at bushings preventing dust and dirt from entering wear surfaces.
Increased safety as there is no need to crawl under or over equipment to service hard-to-reach lubrication points.
Adding an automatic lubrication system increases equipment life by decreasing wear on vital components.
Gain 30 minutes or more of operating time per day with an R.O.I. of less than 12 months.

DUMP TRUCK SYSTEM DESIGN

DUMP TRUCK
SYSTEM DESIGN

MultiPort II Lubricator

MultiPort II Lubricator

The MultiPort II Lubricator is an electrically driven multiple outlet lubrication unit design primarily for use with progressive divider valve systems. The unit is capable of housing up to three independent pumping elements for direct feed to lubrication points or through a distribution network of progressive divider valves. These lubricators are available with 24 VDC motors which make them ideal for use in mobile applications. An integral controller is available, or the pump can be controlled by an external controller (such as our SMDC) or by the customer's PLC/DCS/etc.

PVBM Progressive Divider Valve

PVBM Progressive Divider Valve

PVB Mobile Divider Valves accurately meter and dispense lubricant to as many as 20 outlet lines at operating pressures up to 3600 psi (248 bar). Output volumes are fixed at 0.17cc (0.01 cu. in.) per cycle but can be combined with other outlets by using appropriate fittings for larger outputs. Valves are available with cycle indicator pins to provide visual confirmation of system operation. In addition the cycle pin can be fitted with a switch to provide electrical feedback to a system controller.

Have A Question?

Bijur Delimon has an experienced team ready to help.