Divider Valves
Progressive Divider Valve Manifolds distribute and proportion incoming oil or grease to bearing points. Individual valve blocks operate in a “Progressive” sequence. During operation, the piston within the block must complete a full discharge cycle before another piston begins operation. As long as lubricant is supplied under pressure to the inlet section of the divider, manifold valve blocks will continue to operate in a progressive manner.
When lubricant flow is interrupted to the inlet block, piston movement stops. When flow resumes, piston movement commences at the same point in the discharge cycle. Feed lines deliver lubricant from the valve block to individual lube points. Should a discharge line become blocked, it will stop all the valves operating. Indicators and cycle switches are available to alert a blockage.
Not sure where to start?
Find what products fit your specific application.
M2500G Divider Valves
Progressive (Oil/Grease)
Outlets: 1-20
Discharge: 0.08-1.31cc
PVBM Mobile Divider Valves
Progressive (Oil/Grease)
Outlets: 6-20
Discharge: 0.17cc per outlet
PVB Divider Valves
Progressive (Oil/Grease)
Outlets: 6-20
Discharge: 0.17cc per outlet
3000 Divider Valves
Progressive (Oil/Grease)
Outlets: 1-20
Discharge: 0.41-4.92cc
ZPA Divider Valves
ZPA/G Divider Valves
U-Block Divider Valves
Progressive (Oil/Grease)
Outlets: 4, 6, 8, 12
Discharge: 0.3cc
ZPB Divider Valves
ZPC Divider Valves
SureShot Lubrication Kits
Progressive (Oil/Grease)
Outlets: 4, 6, 8, 12
Discharge: 0.3cc
PE4 Divider Valves
1000 Divider Valves
Progressive (Oil/Grease)
Outlets: 1-18
Discharge: 0.082-0.492cc