Paper-Mill_App_700x378px
Pulp-Paper_Paper-Mill
LUBRICATION SOLUTIONS

PAPER MILLS

THE LUBRICATION
SOLUTION FOR
PAPER MILLS

Stationary equipment used in lumber and wood operations are exposed to tough environments including sawdust, moisture, heat, and continuous operation. In many mills, the operator is left to monitor machine lubrication, while also performing their normal duties. With an automatic lubrication system, the need for an operator to be within the work zone is eliminated, resulting in a safer work environment. Our system fully stands alone with on-board controls or ties in to your existing controls. By properly lubricating your bearings with a steady flow of lubricant, the bearings are kept cool, which reduces the risk of fire. Improve your mill production up-time and increase profits with an automatic lubrication system.

Need help implementing an automatic system?

FEATURES & BENEFITS

Keep bearings free of water and contaminants in the forming and press sections (wet end) with automatic grease systems. Eliminate unplanned downtime.
Precise delivery of lubricants means an end to over lubrication causing "grease breaks" and lost production.
No sophisticated controls required. Fully stand alone with on-board control or ties into existing controls.
Circulating oil systems that keep your bearings running cool in the dryer section despite the increasing demands of larger, faster macines and higher steam temperatures.
Increased ouput and production up-time.
Unmatched lubricant delivery accuracy.
Optional automatic refill.
Oil-Streak-Panel
Air-Oil Panel

PAPER MILL LITERATURE

Lubrication Systems
for Paper Mills

Oil Circulating Systems
for Paper Mills

Automatic Grease Lubrication

Automatic Grease Lubrication

Viton® O-rings standard on all valves and injectors to protect against high heat and synthetic lubricants.
Easy to assemble and replace valves without removing tubing.
Zinc-Nickel plating standard - 1000 hour salt spray. Stainless steel also available.
The system's distribution lines are totally sealed from pump to injector, meaning dirt or dust will not contaminate the lubricant. By maintaining clean oil or grease in the system reservoir you can ensure maxium machinery protection.
The adjustable injectors make it easy to fine tune the system. Injectors can often be adjusted or replaced between cycles, meaning simple maintenance tasks won't interrupt operation.
Barrel-Pump
Barrel Pump
M2500G-4

M2500G Divider Block

M2500G Series Divider Valve Manifolds are the principal components of a progressive lubricating system. Modular construction makes these blocks easy to install, modify and maintain, without removing any tubing. The Zinc-Nickel plated steel body ensures longer life in nasty environments.

FL32-4-SS

FL Injectors

FL injectors are positive displacement grease dispensing valves. Viton O-rings are standard to protect against high heat and synthetic lubricants. The injectors are interchangeable with major competitive brands. They come available in standard or 300 series stainless steel.

Circulating Oil Systems

Circulating Oil Systems

Oil recirculating systems extend the life of bearings or gears, reducing the member of plant shutdowns for maintenance.
Only the highest quality proven components are used as the system normally has to operate continuously 24 hours per day.
Oil Flow Meters to regulate and monitor oil flow to bearings and gears. Individually adjustable. Built-in tube cleaning device does not interrupt flow or trip alarm.
DS405 Controller with real-time logging and storage of flow monitoring data. Low flow/high flow rate alarms are standard.
Circulating-Oil

Have A Question?

Bijur Delimon has an experienced team ready to help.

Already know what product you need?
Check inventory, pricing, & place an order 24/7 by creating an account.

Name


About


Comment