Progressive Lubrication Systems
Bijur Delimon International series progressive lubrication systems are generally used on medium-duty machinery and equipment. Robust pumps are connected to divider valves, some of which are modular, allowing for easy installation, modification and maintenance, without the removal of any tubing.
The series M2500G, 3000 and PVBM Progressive Divider Valve Manifolds distribute and proportion incoming oil or grease to bearing points. A typical divider valve manifold consists of an inlet section, three to ten valves, and an end section. One assembly can serve up to a maximum of 20 lubrication points. Individual divider valve blocks have a discharge piston and built-in outlet check valves. Blocks are offered in various output sizes. The discharge capacity of a block is determined by varying the piston diameter in the valve block.
Twin valve blocks have two outlets located at each end of the assembly and supply rated discharge from each of the two outlets during one complete valve cycle. Single outlet blocks have one end outlet plugged and supply twice the rated output to the open outlet. External cross porting of adjacent valves can be achieved with a cross port kit to combine outputs.
Progressive Divider Valve Operating Sequence
Individual valve blocks operate in a “Progressive” sequence. During operation, the piston within the block must complete a full discharge cycle before another piston begins operation. As long as lubricant is supplied under pressure to the inlet section of the divider, manifold valve blocks will continue to operate in a progressive manner.
When lubricant flow is interrupted to the inlet block, piston movement stops. When flow resumes, piston movement commences at the same point in the discharge cycle. Feed lines deliver lubricant from the valve block to individual lube points. Should a discharge line become blocked, it will stop all the valves operating. Indicators are available to alert a blockage.
REQUEST
A QUOTE
Need help implementing
a Progressive system?
View or download the Progressive Systems brochure.
-
PM26 PumpSKU: 39740HP PM26 26:1 5.25PPM 400lb. Learn More
-
PM60 PumpSKU: F53482180:1 PUMP F532821 with Pneumatic Inductor Learn More
-
PM60 PumpSKU: F53412112:1 PUMP F532130 with Pneumatic Inductor Learn More
-
PM45 PumpSKU: F53472170:1 PUMP F531721 with Pneumatic Inductor Learn More
-
PM45 PumpSKU: F53442140:1 PUMP F531421 with Pneumatic Inductor Learn More
-
PM60 PumpSKU: F534810Kit Pump 532821 Cover F418026 FP F417009 Hose F534103 Learn More
-
PM60-801 PumpSKU: F532811HD 80:1 5.5PPM 400lb. Flange Mount Learn More
-
PM45-701 PumpSKU: F531711HD HP 70:1 4.5PPM 400lb. Flange Mount Learn More
-
PM45-401 PumpSKU: F531411HD 40:1 7.5PPM 400lb. Flange Mount Learn More
-
PM45-251 PumpSKU: F531211HD 25:1 13.5PPM 400lb. Flange Mount Learn More
-
PM35 PumpSKU: F311001Kit Pump Cart 60:1 400lb. HD Cart Learn More
-
PM35 PumpSKU: F335261Kit Pump Cart 60:1 400lb. SD Cart Learn More