SPIN-REV Spray Unit
The SPIN-REV Lubricator eliminates residual drift of oil fog or mist during operation. The system utilizes a pressurized oil supply and individual metering devices to carry a wide range of oil viscosities to a variety of high speed, single and multi-spindle applications.
The SPIN-REV Lubricator is capable of delivering very small quantities of lubrication in a continuous mode. Oil is carried through flexible delivery lines to lubrication points (dears, cams, chains, or anti-friction bearings). A separate oil line is contained coaxially within the air-line thus preventing the formation of condensation within the air the lines.
Spray droplets (not mist) are generated at the ends of the distribution line nozzles which eliminate intermittent oil delivery. Optimum lubrication is achieved.
NOTE: The SpinRev lubricator is obsolete. The below parts will be available to order as spares. See Oil Streak Generator or Airmax for possible replacements.
-
Low Level SwitchSKU: HE1092
-
SealSKU: HO403Joint torique 3/8 x 1/2 x 1/16 En savoir plus
-
FittingSKU: B7305Bouchon de Vidange Reservoir 3/8-24 Acier En savoir plus
-
FittingSKU: B1936Raccord coudé 90° 1/8NPT En savoir plus
-
HardwareSKU: HO459Anneau En savoir plus
-
FittingSKU: B6086Adaptateur droit 1/4T x 1/8NPT En savoir plus
-
FittingSKU: A2833Raccord coudé 90° 1/8NPT En savoir plus
-
FittingSKU: B7743Adaptateur 90° 1/4T x 1/8NPT En savoir plus
-
Solenoid ValveSKU: C3245-1120 VAC NF En savoir plus
-
RegulatorSKU: B97791/8 NPT En savoir plus
-
Pressure GaugeSKU: B10114Manomètre 7 bar CBM 1.85"Ø 1/8NPTF En savoir plus
-
FilterSKU: B6303Bouchon de remplissage UB En savoir plus