THE LUBRICATION SOLUTION
FOR SAW MILLS

THE LUBRICATION
SOLUTION FOR
SAW MILLS

Stationary equipment used in lumber and wood operations are exposed to tough environments including sawdust, moisture, heat, and continuous operation. In many mills, the operator is left to monitor machine lubrication, while also performing their normal duties. With an automatic lubrication system, the need for an operator to be within the work zone is eliminated, resulting in a safer work environment. Our system fully stands alone with on-board controls or ties in to your existing controls. By properly lubricating your bearings with a steady flow of lubricant, the bearings are kept cool, which reduces the risk of fire. Improve your mill production up-time and increase profits with an automatic lubrication system.

Need help implementing an automatic system? Contact an expert.

Need help implementing an automatic system?
Contact an expert.

FEATURES & BENEFITS

Stationary equipment used in lumber and wood operations are exposed to tough environments including sawdust, moisture, heat and continuous operation. Utilizing automatic lubrication increase up-time by protecting bearings and other components.
Keep bearings cool and reduce fire risk by properly lubricating your bearings with a steady flow of lubricant.
Automatic lubrication can prevent corrosion in equipment exposed to outside elements by preventing water from forming in the bearing.
Lubricate while the equipment is running and increase safety by eliminating the need for operators to be within the work zone.
No sophisticated controls required. Fully stand alone with on-board control or ties in to your existing controls.
Increased output and production up-time.
Optional automatic refill.

FEATURES & BENEFITS

Stationary equipment used in lumber and wood operations are exposed to tough environments including sawdust, moisture, heat and continuous operation. Utilizing automatic lubrication increases up-time by protecting bearings and other components.
Keep bearings cool and reduce fire risk by properly lubricating your bearings with a steady flow of lubricant.
Automatic lubrication can prevent corrosion in equipment exposed to outside elements by preventing water from forming in the bearing.
Lubricate while your equipment is running and increase safety by eliminating the need for operators to be within the work zone.
No sophisticated controls required. Fully stand alone with on-board control or ties in to your existing controls.
Increased output and production up-time.
Optional automatic refill.

AUTOMATIC GREASE LUBRICATION

Viton® O-rings standard on all valves and injectors to protect against high heat and synthetic lubricants.
Easy to assemble and replace valves without removing tubing.
Zinc-Nickel plating standard - 1000 hour salt spray. Stainless steel also available.
The system's distribution lines are totally sealed from pump to injector, meaning dirt or sawdust will not contaminate the lubricant. By maintaining clean oil or grease in the system reservoir you can ensure maximum machinery protection.
The adjustable injectors make it easy to fine tune the system. Injectors can often be adjusted or replaced between cycles, meaning simple maintenance tasks won't interrupt operation.

FEATURES & BENEFITS

Keep bearings free of water and contaminants in the forming and press sections (wet end) with automatic grease systems. Eliminate unplanned downtime.
Precise delivery of lubricants means an end to over lubrication causing "grease breaks" and lost production.
No sophisticated controls required. Fully stand alone with on-board control or ties into existing controls.
Circulating oil systems that keep your bearings running cool in the dryer section despite the increasing demands of larger, faster machines and higher steam temperatures.
Increased output and production up-time.
Unmatched lubricant delivery accuracy.
Optional automatic refill.

AUTOMATIC GREASE LUBRICATION

Viton® O-rings standard on all valves and injectors to protect against high heat and synthetic lubricants.
Easy to assemble and replace valves without removing tubing.
Zinc-Nickel plating standard - 1000 hour salt spray. Stainless steel also available.
The system's distribution lines are totally sealed from pump to injector, meaning dirt or sawdust will not contaminate the lubricant. By maintaining clean oil or grease in the system reservoir you can ensure maximum machinery protection.
The adjustable injectors make it easy to fine tune the system. Injectors can often be adjusted or replaced between cycles, meaning simple maintenance tasks won't interrupt operation.

SAW MILL SYSTEM DESIGN

Automatic Grease Lubrication

MultiPort Pump

MultiPort Pump

The MultiPort II Lubricator is an electrically driven multiple outlet lubrication unit designed primarily for use with progressive divider valve systems to accurately control the amount of grease and to monitor system performance via an integral controller.

M2500G Divider Block

M2500G Divider Block

M2500G Series Divider Valve Manifolds are the principal components of a progressive lubricating system. Modular construction makes these blocks easy to install, modify and maintain, without removing any tubing. The Zinc-Nickel plated steel body ensures longer life in nasty environments.

FL Injectors

FL Injectors

FL injectors are positive displacement grease dispensing valves. Viton O-rings are standard to protect against high heat and synthetic lubricants. The injectors are interchangeable with major competitive brands. They come available in standard or 300 series stainless steel.

Have A Question?

Bijur Delimon has an experienced team ready to help. 

Name


About


Comment