THE LUBRICATION SOLUTION
FOR WASTE TRUCKS
Whether you own or lease the equipment, proper maintenance pays off for everyone. The most common bearing failure is a damaged grease seal due to over pressurization while manually greasing. An automatic lubrication system minimizes pressure and provides metered grease to all points while your equipment is in operation. When all bearings are properly lubricated, you can expect an extended service life of your equipment and avoid unexpected costly repairs and downtime. Tired of crawling under or over equipment to service hard-to-reach lubrication points? Our automatic system takes care of the work for you.
Need help implementing an automatic system?
FEATURES & BENEFITS
NLGI EP #2 Grease System
Fluid Grease System
MultiPort II Lubricator
The MultiPort II Lubricator is an electrically driven multiple outlet lubrication unit design primarily for use with progressive divider valve systems. The unit is capable of housing up to three independent pumping elements for direct feed to lubrication points or through a distribution network of progressive divider valves. These lubricators are available with 24 VDC motors which make them ideal for use in mobile applications. An integral controller is available, or the pump can be controlled by an external controller (such as our SMDC) or by the customer's PLC/DCS/etc.
PVBM Progressive Divider Valve
PVB Mobile Divider Valves accurately meter and dispense lubricant to as many as 20 outlet lines at operating pressures up to 3600 psi (248 bar). Output volumes are fixed at 0.17cc (0.01 cu. in.) per cycle but can be combined with other outlets by using appropriate fittings for larger outputs. Valves are available with cycle indicator pins to provide visual confirmation of system operation. In addition the cycle pin can be fitted with a switch to provide electrical feedback to a system controller.
The BL Lubricator is a motor driven gear pump available with either a 12 or 24 VDC motor. These lubricators are fitted to 3 liter reservoirs and are designed primarily for use with mobile equipment. BL Lubricators are normally used in conjunction with VXLO Indirect Injectors mounted throughout the distribution network. A remote controller (SMDC, sold separately) is used to program and monitor lubrication intervals. Multiple points of lubrication can be achieved with this gear pump using NLGI grade 00 and NLGI grade 000 greases. Consult Bijur Delimon International for applications requiring NLGI grade 0 grease.