MOBILE DRILL RIGS
Your mobile investment is significant, the equipment is large, and it operates in extreme and demanding conditions day in and day out. An automatic lubrication system can maximize your equipment’s life and help to avoid unforeseen equipment shutdowns. The system greases every point while the equipment is in operation, maintaining a constant seal at the friction points creating a grease barrier to protect and prevent contaminants from entering the wear surfaces. No manual intervention is required to reach the lubrication points, allowing for increased operation safety. Save time and keep your employees safe with an automatic lubrication system that increases your equipment life and helps you avoid costly repairs.
Need help implementing an automatic system?
FEATURES & BENEFITS
DRILL RIG SYSTEM DESIGN
MOBILE DRILL RIG
MultiPort II Lubricator
The MultiPort II Lubricator is an electrically driven multiple outlet lubrication unit design primarily for use with progressive divider valve systems. The unit is capable of housing up to three independent pumping elements for direct feed to lubrication points or through a distribution network of progressive divider valves. These lubricators are available with 24 VDC motors which make them ideal for use in mobile applications. An integral controller is available, or the pump can be controlled by an external controller (such as our SMDC) or by the customer's PLC/DCS/etc.
PVBM Progressive Divider Valve
PVB Mobile Divider Valves accurately meter and dispense lubricant to as many as 20 outlet lines at operating pressures up to 3600 psi (248 bar). Output volumes are fixed at 0.17cc (0.01 cu. in.) per cycle but can be combined with other outlets by using appropriate fittings for larger outputs. Valves are available with cycle indicator pins to provide visual confirmation of system operation. In addition the cycle pin can be fitted with a switch to provide electrical feedback to a system controller.