SMAC Controller Software Update
Bijur Delimon is pleased to announce a software update to our SMAC Controller. Updates include activating lubrication based on inputs from the host machinery in place of time intervals, and changes to Low Level Polarity and Low Level Alarm Lock settings.
New key enhancements are:
- Machine Count Input allows SMAC to activate lubrication based on inputs from the host machinery in place of time intervals; this may be useful in applications where the number of machine cycles varies over time, such as stamping presses.
- Similar to the now-obsolete SS2200 Controller, the low-level switch contacts (terminal 5 and 6) are used for machine count input, and the user can select the count interval during setup (Idle Time options FC4, FC5 and FC6).
- User can choose either Low Level Monitoring or Machine Count Input, but not both. If both features are needed, please consider our SC400 Controller.
- Low Level Polarity selection in the Advanced Setup Menu allows SMAC to receive a level switch signal that either closes on low level (default) or opens on low level.
- Low Level Alarm Lock selection in the Advanced Setup Menu determines whether the low level alarm is automatically reset once the reservoir is refilled (default) or whether the user must press the R button to acknowledge the refill.
Datasheet #46912 has been revised (Revision 5, dated 9/21) to reflect these changes.
110VAC SMAC units (part number 22361-E2) shipping after October 1, 2021 include the software update.
220VAC SMAC units (part number 22361-E1) will be updated in the near future.
Please direct any technical inquiries to a Bijur Delimon Application Engineer at 1-800-227-1063.
