Progressive Lubrication Systems

Bijur Delimon International series progressive lubrication systems are generally used on medium-duty machinery and equipment. Robust pumps are connected to divider valves, some of which are modular, allowing for easy installation, modification and maintenance, without the removal of any tubing.

The series M2500G, 3000 and PVBM Progressive Divider Valve Manifolds distribute and proportion incoming oil or grease to bearing points. A typical divider valve manifold consists of an inlet section, three to ten valves, and an end section. One assembly can serve up to a maximum of 20 lubrication points. Individual divider valve blocks have a discharge piston and built-in outlet check valves. Blocks are offered in various output sizes. The discharge capacity of a block is determined by varying the piston diameter in the valve block.

Twin valve blocks have two outlets located at each end of the assembly and supply rated discharge from each of the two outlets during one complete valve cycle. Single outlet blocks have one end outlet plugged and supply twice the rated output to the open outlet. External cross porting of adjacent valves can be achieved with a cross port kit to combine outputs.

Progressive Divider Valve Operating Sequence

Individual valve blocks operate in a “Progressive” sequence. During operation, the piston within the block must complete a full discharge cycle before another piston begins operation. As long as lubricant is supplied under pressure to the inlet section of the divider, manifold valve blocks will continue to operate in a progressive manner.

When lubricant flow is interrupted to the inlet block, piston movement stops. When flow resumes, piston movement commences at the same point in the discharge cycle. Feed lines deliver lubricant from the valve block to individual lube points. Should a discharge line become blocked, it will stop all the valves operating. Indicators are available to alert a blockage.

A CLOSER LOOK

View or download the Progressive Systems brochure.

View as Grid List

Items 37-48 of 2721

per page
Set Descending Direction
  1. PM60-801 Pump
    PM60-801 Pump
    SKU: F532821
    Please Sign-In for Quote
    HD 80:1 5.5PPM 120lb. Flange Mount Learn More
  2. PM60-801 Pump
    PM60-801 Pump
    SKU: F532811
    Please Sign-In for Quote
    HD 80:1 5.5PPM 400lb. Flange Mount Learn More
  3. PM45-701 Pump
    PM45-701 Pump
    SKU: F531731
    Please Sign-In for Quote
    HD HP 70:1 4.5PPM Bulk Tote Learn More
  4. PM45-701 Pump
    PM45-701 Pump
    SKU: F531721
    Please Sign-In for Quote
    HD HP 70:1 4.5PPM 120lb. Flange Mount Learn More
  5. PM45-701 Pump
    PM45-701 Pump
    SKU: F531711
    Please Sign-In for Quote
    HD HP 70:1 4.5PPM 400lb. Flange Mount Learn More
  6. PM45-401 Pump
    PM45-401 Pump
    SKU: F531431
    Please Sign-In for Quote
    HD 40:1 7.5PPM Bulk Tote Learn More
  7. PM45-401 Pump
    PM45-401 Pump
    SKU: F531421
    Please Sign-In for Quote
    HD 40:1 7.5PPM 120lb. Flange Mount Learn More
  8. PM45-401 Pump
    PM45-401 Pump
    SKU: F531411
    Please Sign-In for Quote
    HD 40:1 7.5PPM 400lb. Flange Mount Learn More
  9. PM45-251 Pump
    PM45-251 Pump
    SKU: F531211
    Please Sign-In for Quote
    HD 25:1 13.5PPM 400lb. Flange Mount Learn More
  10. PM35 Pump
    PM35 Pump
    SKU: F311001
    Please Sign-In for Quote
    Kit Pump Cart 60:1 400lb. HD Cart Learn More
  11. PM35 Pump
    PM35 Pump
    SKU: F335261
    Please Sign-In for Quote
    Kit Pump Cart 60:1 400lb. SD Cart Learn More
  12. PM35 Pump
    PM35 Pump
    SKU: F335251
    Please Sign-In for Quote
    Kit Pump Cart 60:1 400lb. X-Frame Dolly Learn More
View as Grid List

Items 37-48 of 2721

per page
Set Descending Direction

Have A Question?

Bijur Delimon has an experienced team ready to help.