Progressive Lubrication Systems

Bijur Delimon International series progressive lubrication systems are generally used on medium-duty machinery and equipment. Robust pumps are connected to divider valves, some of which are modular, allowing for easy installation, modification and maintenance, without the removal of any tubing.

The series M2500G, 3000 and PVBM Progressive Divider Valve Manifolds distribute and proportion incoming oil or grease to bearing points. A typical divider valve manifold consists of an inlet section, three to ten valves, and an end section. One assembly can serve up to a maximum of 20 lubrication points. Individual divider valve blocks have a discharge piston and built-in outlet check valves. Blocks are offered in various output sizes. The discharge capacity of a block is determined by varying the piston diameter in the valve block.

Twin valve blocks have two outlets located at each end of the assembly and supply rated discharge from each of the two outlets during one complete valve cycle. Single outlet blocks have one end outlet plugged and supply twice the rated output to the open outlet. External cross porting of adjacent valves can be achieved with a cross port kit to combine outputs.

Progressive Divider Valve Operating Sequence

Individual valve blocks operate in a “Progressive” sequence. During operation, the piston within the block must complete a full discharge cycle before another piston begins operation. As long as lubricant is supplied under pressure to the inlet section of the divider, manifold valve blocks will continue to operate in a progressive manner.

When lubricant flow is interrupted to the inlet block, piston movement stops. When flow resumes, piston movement commences at the same point in the discharge cycle. Feed lines deliver lubricant from the valve block to individual lube points. Should a discharge line become blocked, it will stop all the valves operating. Indicators are available to alert a blockage.

A CLOSER LOOK

View or download the Progressive Systems brochure.

View as Grid List

Items 13-24 of 2721

per page
Set Descending Direction
  1. Follower Plate
    Follower Plate
    SKU: 200225
    Please Sign-In for Quote
    PM26 120lb. Learn More
  2. Cover
    Cover
    SKU: 338163
    Please Sign-In for Quote
    Drum Cover PM26 400lb. Learn More
  3. Cover
    Cover
    SKU: 338371
    Please Sign-In for Quote
    Drum Cover PM26 120lb. Learn More
  4. Bung
    Bung
    SKU: ADA10121B
    Please Sign-In for Quote
    Adapter PM26 Learn More
  5. PM26 Pump
    PM26 Pump
    SKU: 39740
    Please Sign-In for Quote
    HP PM26 26:1 5.25PPM 400lb. Learn More
  6. PM26 Pump
    PM26 Pump
    SKU: 39739
    Please Sign-In for Quote
    HP PM26 26:1 5.25PPM 120lb. Learn More
  7. PM4-31S Pump
    PM4-31S Pump
    SKU: F333120
    Please Sign-In for Quote
    SS 3:1 6.6GPM Stub Learn More
  8. PM2-11S Pump
    PM2-11S Pump
    SKU: F331120
    Please Sign-In for Quote
    SS 1:1 6.6GPM Stub Learn More
  9. Hose
    Hose
    SKU: F539009
    Please Sign-In for Quote
    Kit MP Hose PM60 12:1 F823/F935F08/F936M08/F863/F1981 Learn More
  10. Hose
    Hose
    SKU: F534103
    Please Sign-In for Quote
    Kit HP Hose PM45/PM60 F823/F835F08/F936F08/F884/F1981 Learn More
  11. Hose
    Hose
    SKU: F903
    Please Sign-In for Quote
    Kit HP Hose PM3 F801/F930/F931/F871000 Learn More
  12. Follower Plate
    Follower Plate
    SKU: F417009
    Please Sign-In for Quote
    HD PM45/PM60 400lb. Learn More
View as Grid List

Items 13-24 of 2721

per page
Set Descending Direction

Have A Question?

Bijur Delimon has an experienced team ready to help.