Location

USA

change

Steel

Barrel Pumps

Made with precision and corrosion resistant parts, high alloy materials and quality seals, barrel pumps are highly efficient with low noise and air consumption. Oil pumps available in 8, 10 and 16 GPM.

BM-B Lubricator

A versatile unit that can be used with injectors, series progressive divider valves or dual line systems. It is ideal for medium- and large-sized machinery, with a maximum working pressure is 5800 PSI. The BM-B is a...

BS-B Pump

The BS-B lubricator is used in cases where a lot of lubrication points shall centrally and reliably be supplied with lubricant. In connection with ZV-B distributors, the pump is predominantly used in dual-line lubrication...

CS2000 Stations

CS2000 stations store, control and supply the lubricant to systems. Depending on reservoir size, they can be used in systems that service anything from small machine tools to large machinery in steel mills. Or from small to large...

DA Lubricators

DA Lubricators are manual grease and oil, double-action piston high pressure pumps.

DC36 Stations

DC36 stations store, control and supply the lubricant to systems. The lubricant must be oil with a viscosity of not greater than 1900 SSU at 100 degrees F. DC36 stations can be used in systems that service equipment requiring oil...

DD Valve

Dual line valves that are completely hydraulic in operation, will deliver either oil or grease, are fully and individually adjustable in regard to discharge quantity, and are equipped with operational indicators.

DDM/SDM Modular Valve

Modular dual line valves allow you to specify individual discharge amounts within a dual line block. Each module fits onto a manifold (up to 20 outlets per manifold) to give you the most versatile dual line solution in the...

DM Valve

Dual line valves that are completely hydraulic in operation, will deliver either oil or grease, are fully and individually adjustable in regard to discharge quantity, and are equipped with operational indicators.

DPG Lubricator

The DPG Pneumatic Lubricator is an air-operated reciprocating lubricator that discharges a fixed amount of lubricant into systems during a lubrication cycle.

DR4-5K Reversing Valve

The DR4 Reversing Valve alternates the flow of lubricant thru the lines of Dual Line systems so that lubricant is directed first to one supply line then the other, during system cycles. The reversing action is automatic,...

The DS405 is designed to monitor automatic oil or grease lubrication systems and is ideally suited to be used with our Lube Point Monitor (55105).

FR20 Reversing Valve

FR20 Reversing Valves operate in conjunction with two pressure switches, alternating lubricant flow through DC41 end-of-line systems so that lubricant is directed first to one set of Dualine valve inlet ports and then the other,...

GPO Lubricator

The GPO Lubricator is a motor-driven gear pump that is designed for use with single line centralized lubricating systems utilizing progressive distributors or injectors. Standard features include: liquid level indicator, pressure...

55105 Lube Point Monitor

The 55105 Lube Point Monitor is an accurate oval gear mechanism that incorporates two magnets into one of the oval gears. The body incorporates a reed switch which senses the magnet passing. Lubricant entering the 55105 causes...

M2500 Series Divider Valve Manifold

The principal components of a progressive lubricating system. Modular construction makes these blocks easy to install, modify and maintain, without removing any tubing.

M2500G Series Divider Valve Manifold

The principal components of a progressive lubricating system. Modular construction makes these blocks easy to install, modify and maintain, without removing any tubing.

Pressure Gauges

Pressure gauges are used as a convenient means of indicating pressure developed in the distribution system.

PVB Divider Valve

The PVB divider manifold is designed for small-size series progressive lubrication systems. It is a cost efficient solution for supplying multiple lubrication points with relatively small volumes of oil and grease.

SS2200 Controller

Microprocessor-based programmable controller designed to operate single line and dual line central lubrication systems.

V3 Lubricator

A continuous delivery motor-driven gear pump ideal in single line resistance systems.

V5 Series Lubricator

Continuous output motor-driven gear pump with built-in by-pass valve is easily adjusted to meet the lube needs of a broad range of machinery.

VXLO Injector

The VXLO Injector meters and displaces positive volumes of lubricant to individual lubrication points. Each injector in a system is independent of each other.

Our brands

  • Bijur
  • Delimon
  • Farval
  • LubeSite Systems, Inc.
  • Delimon Denco Lubrications