Steel
The air oil blocks type AVH are designed, amongst other applications for high speed spindle lubrication. Bijur air oil injectors deliver very precise amount of oil during a predetermined cycle time. A measured dose of oil is...
Suitable everywhere lubrication grease is to be fed with high pressure straight from the barrel.
The BM-B pump, because of is constructional characteristics, may be used in single line-, dual line-, progressiveand spray lubricating systems. Regardless of the number of lubrication points, the pump can be effectively adapted...
The pump BS-B is ideally suitable for applications where long extended main line runs and a large number of friction points are to be reliably served from one central station. In conjunction with distributors type ZV-B downstream...
Measuring valves are the essence of dualine lubrication systems. They are mounted close to the lubrication points and hydraulically operated by pressure from the first and then the second of the two supply lines. On each...
The DR4 is an hydraulically operated directional control valve for use with dualine loop or non-return systems.
For optical and electrical oil flow control and correct setting of oil volume in oil and cool water recirculation systems.
The lubricating press is a movable appliance for the lubrication of individual lubrication points with consistent lubricants.
The FZ-A type lubricator is an central plunger grease pump, which is operating without valves and springs. The FZ-A type grease lubricator is intended mainly for multiple systems, i.e., in systems with up to a maximum of 12...
The FZ-B type lubricator is an central plunger grease pump, which is operating without valves and springs. The numerous ratios available within the range 3 : 1 to 2880 : 1 which are between the speed of the drive shaft on machine...
The M2500 series dividers are perfectly adapted for use in Bijur Farval progressive lubrication systems. The modular construction makes the system easy to install, and can be modified and maintained without removing any tubing....
Three ranges of piping adaptors suitable for mounting the modular measuring valves, DDM1, SDM1, DDM5, SDM5, DDM15 and SDM15.
Three ranges of piping adaptors suitable for mounting the modular measuring valves, DDM1, SDM1, DDM5, SDM5, DDM15 and SDM15.
The distributors type PAG are used as lubricant manifolds in dual-line central systems. Due to their sturdy contruction and long service life, they are predominantly applied upon servicing and extending already existing systems...
Positive dividers type E4 are amployed for progressive centralized lubrication systems. The grease or oil fed into them under pressure is distributed to various lubrication points or slave dividers. If so required, the dividers...
The distributors type PVB in building-block design are applied in small-size progressive lubrication systems representing a cost-saving and efficient solution for central supply of lubricating points with relatively small...
Versatile application as pneumatically controlled 3/2-way valve, 2/2-way valve, directional control valve with pressure controlling and pressure relief valve. Usable for all types of lubricating systems but particularly suited...
For hydraulic systems, particularly dual-line centralized systems. For use SA-H as 3/2-way cock close both the outlets B.
For hydraulic systems, particularly dual-line centralized systems. For use SA-V as 3/2-way valve close outlet B.
Measuring valves are the essence of dualine lubrication systems. They are mounted close to the lubrication points and hydraulically operated by pressure from the first and then the second of the two supply lines. On each...
The switching device SG-A is used as differential pressure switch in dual-line centralized lubrication system. When the differtial pressure is 50 bar and/or 100 bar, it releases a pulse for the reversion of the directional...
The SKYJET compact pre-distributor serves to dose, branch and distribute lubricant in air-oil lubrication systems. It will be applicable in complex installations with a high number of lubrication points to feed the SKYJET compact...
The SKYJET compact sub-distributor serves to dose, branch and distribute lubricant in air-oil lubrication systems. It is primarily adopted to lubricate the antifriction bearings of roll stands, continuous casting plants, roller...
The SKYJET distributor cabinet serves to dose and distribute the air-oil mixture to the relevant lube points. The cabinet (in larger-size facilities several cabinets) is arranged in a decentralized location. Oil supply is...
When monitoring is desired, both the lubricant supply and the air supply to the air-oil distributor can be monitored by means of different elements. Typically, pressure switches in conjunction with timers and flow meters have...
The SKYJET lance serves to dose, branch and distribute lubricant in air-oil lubrication systems. It is primarily adopted to lubricate the antifriction bearings of roll stands, continuous casting plants and wire-rod mills.
The SKYJET lance serves to dose, branch and distribute lubricant in air-oil lubrication systems. It is primarily adopted to lubricate the antifriction bearings of roll stands, continuous casting plants and wire-rod mills.
The SKYJET oil lubrication unit serves for automatic and dosed feeding of lubricant to the downstream progressive or air-oil distributors. The tank size as well as the feed or delivery capacity of the gear pump depend on the size...
The spraying lubrication is used where lubricating greases, lubricating oils or even adhesive lubricants need to be applied in an even, metered and selective manner due to user-specific and function-related requirements.
The lubricationpump type VB-B are reservoirpumps with a single-action plunger operated by a hand lever. The lubricant reservoir has a capacity of 1; 1.6 or 4 litre. Pump of type VB-B are intended for grease and semifluid grease....
The reversing valve VUD/3 is an hydraulic 4/3-way valve with electromotive drive. It is used for the alternate pressurization and pressure relief of the main lines in single and multi-strand dual-line systems. The valve has 3...
The major element of a progressive system is the lubricant distributor. Distributors ZP-A are used to divide and meter lubricant in total loss central lubrication systems (oil, liquid grease and grease) and in oil recirculation...
Progressive group-lubrication distributors ZP-A/G are used in group lubrication systems where a lot of machines or plants, which are either of the same kind or similar to each other and erected in a hall, have to be supplied with...
The major element of a progressive system is the lubricant distributor. Distributors ZP-C are used to divide and meter lubricant in total loss central lubrication systems (oil, liquid grease and grease) and in oil recirculation...
The major element of a progressive system is the lubricant distributor. Distributors ZP-D are used to divide and meter lubricant in total loss central lubrication systems (oil, liquid grease and grease) and in oil recirculation...
The pump ZP3000 in various design versions are used for direct lubrication in multi-line systems (one delivery element per lubricating point) or as delivery pump for lubricant in progressive systems.
The pump ZP4000 in various design versions are used for direct lubrication in multi-line systems (one delivery element per lubricating point) or as delivery pump for lubricant in progressive systems.
The central lubrication pump ZP5000 are used for direct lubrication in multi-line systems (one delivery element per lubricating point) or as delivery pump for lubricant in progressive systems.
The pumps ZP6000 are used for direct lubrication in multi-line systems (one delivery element per lubricating point) or as delivery pump for lubricant in progressive systems.
The distributors ZV-B are used for dual-line central lubrication systems for grease and for oil. Their function is to meter the lubricant and to press it through the lines to the lubrication points independently of back pressure.
The distributors ZV-C are used for dual-line central lubrication systems for grease and for oil. Their function is to meter the lubricant and to press it through the lines to the lubrication points independently of back pressure.
The distributors ZV-F are used for dual-line central lubrication systems for grease and for oil. Their function is to meter the lubricant and to press it through the lines to the lubrication points independently of back pressure.
Browse products by