Pulp and Paper
Suitable everywhere lubrication grease is to be fed with high pressure straight from the barrel.
The barrel pump BF-G is adapted to take the grease of penetration class 000 up to 2 straight from a 50 l and 210 litre barrel (DIN 6644 -2 / - 4 and DIN EN 13008).
The BM-B pump, because of is constructional characteristics, may be used in single line-, dual line-, progressiveand spray lubricating systems. Regardless of the number of lubrication points, the pump can be effectively adapted...
The pump BS-B is ideally suitable for applications where long extended main line runs and a large number of friction points are to be reliably served from one central station. In conjunction with distributors type ZV-B downstream...
Measuring valves are the essence of dualine lubrication systems. They are mounted close to the lubrication points and hydraulically operated by pressure from the first and then the second of the two supply lines. On each...
The DR4 is an hydraulically operated directional control valve for use with dualine loop or non-return systems.
For optical and electrical oil flow control and correct setting of oil volume in oil and cool water recirculation systems.
The DYNAMIS pump has been developed and designed to serve the user as a multi-function automatic lubricant pump. Thanks to its compact construction and the consistent implementation of the modular system, this pump can be used...
The lubricating press is a movable appliance for the lubrication of individual lubrication points with consistent lubricants.
The FZ-A type lubricator is an central plunger grease pump, which is operating without valves and springs. The FZ-A type grease lubricator is intended mainly for multiple systems, i.e., in systems with up to a maximum of 12...
The FZ-B type lubricator is an central plunger grease pump, which is operating without valves and springs. The numerous ratios available within the range 3 : 1 to 2880 : 1 which are between the speed of the drive shaft on machine...
Three ranges of piping adaptors suitable for mounting the modular measuring valves, DDM1, SDM1, DDM5, SDM5, DDM15 and SDM15.
Three ranges of piping adaptors suitable for mounting the modular measuring valves, DDM1, SDM1, DDM5, SDM5, DDM15 and SDM15.
The distributors type PVB in building-block design are applied in small-size progressive lubrication systems representing a cost-saving and efficient solution for central supply of lubricating points with relatively small...
Versatile application as pneumatically controlled 3/2-way valve, 2/2-way valve, directional control valve with pressure controlling and pressure relief valve. Usable for all types of lubricating systems but particularly suited...
The pressure relief valve is preferably used as safety valve to protect central lubrication systems from overpressure. It is suitable especially in total-loss systems.
For hydraulic systems, particularly dual-line centralized systems. For use SA-H as 3/2-way cock close both the outlets B.
For hydraulic systems, particularly dual-line centralized systems. For use SA-V as 3/2-way valve close outlet B.
Measuring valves are the essence of dualine lubrication systems. They are mounted close to the lubrication points and hydraulically operated by pressure from the first and then the second of the two supply lines. On each...
The lubricationpump type VB-B are reservoirpumps with a single-action plunger operated by a hand lever. The lubricant reservoir has a capacity of 1; 1.6 or 4 litre. Pump of type VB-B are intended for grease and semifluid grease....
The reversing valve VUD/3 is an hydraulic 4/3-way valve with electromotive drive. It is used for the alternate pressurization and pressure relief of the main lines in single and multi-strand dual-line systems. The valve has 3...
The pump ZP3000 in various design versions are used for direct lubrication in multi-line systems (one delivery element per lubricating point) or as delivery pump for lubricant in progressive systems.
The pump ZP4000 in various design versions are used for direct lubrication in multi-line systems (one delivery element per lubricating point) or as delivery pump for lubricant in progressive systems.
The central lubrication pump ZP5000 are used for direct lubrication in multi-line systems (one delivery element per lubricating point) or as delivery pump for lubricant in progressive systems.
The distributors ZV-B are used for dual-line central lubrication systems for grease and for oil. Their function is to meter the lubricant and to press it through the lines to the lubrication points independently of back pressure.
The distributors ZV-C are used for dual-line central lubrication systems for grease and for oil. Their function is to meter the lubricant and to press it through the lines to the lubrication points independently of back pressure.
The distributors ZV-F are used for dual-line central lubrication systems for grease and for oil. Their function is to meter the lubricant and to press it through the lines to the lubrication points independently of back pressure.
Browse products by