Mobile Off-road
A pneumatic pump designed, depending on the version, to feed oil to Bijur's resistance (SLR) or volumetric (PDI) lubrication systems.
Bijur’s high performance Air / Oil Lubricating system delivers high-efficiency lubrication and cooling for highspeed spindles and other surfaces requiring precise lubrication. The advance design delivers precise amounts of...
The air oil blocks type AVH are designed, amongst other applications for high speed spindle lubrication. Bijur air oil injectors deliver very precise amount of oil during a predetermined cycle time. A measured dose of oil is...
The Battery-powered Grease Gun is cordless and frees you from cumbersome cords or air hoses.
The BM-B pump, because of is constructional characteristics, may be used in single line-, dual line-, progressiveand spray lubricating systems. Regardless of the number of lubrication points, the pump can be effectively adapted...
The pump BS-B is ideally suitable for applications where long extended main line runs and a large number of friction points are to be reliably served from one central station. In conjunction with distributors type ZV-B downstream...
A range of heavy duty manually operated pumps for use with dual-line non return systems where the change from one supply line to the second is achieved automatically by the rise in pressure.
A range of heavy duty manually operated pumps for use with dualline non return systems where the change from one supply line to the second is achieved automatically by the rise in pressure.
The DCB pump is an electromagnetic piston pump, intended for oil lubrication in Single Line Resistance systems. The unit is available with a 1 litre or 4 litres reservoir, with a level switch option for the 4 litres model.
Two ranges of line mounting adjustable metering units for use with a dualine system, which discharge a fixed volume of lubricant to half the lubrication points on pressurisation of one line and to the remaining points on...
Measuring valves are the essence of dualine lubrication systems. They are munted close to the lubrication points and hydraulically operated by pressure from the first and then the second of the two supply lines. On each...
Two ranges of line mounting adjustable metering units for use with a dualine system, which discharge a fixed volume of lubricant to half the lubrication points on pressurisation of one line and to the remaining points on...
A range of line mounted, adjustable metering units for use with dualine lubrication systems, whereby pressurisation of either line discharges a fixed volume of lubricant to the lubrication point.
The DR4 is an hydraulically operated directional control valve for use with dualine loop or non-return systems.
The DS pump is a 24V DC electrically operated, piston pump, intended for pumping lubricating grease in small progressive systems. With its compact design, and disposable grease cartridge, it will integrate into a machine tool...
Dynamis Maxx Lubricators are electrically driven piston pumps designed for use with series progressive systems.
The DYNAMIS pump has been developed and designed to serve the user as a multi-function automatic lubricant pump. Thanks to its compact construction and the consistent implementation of the modular system, this pump can be used...
FD valves are designed for use with progressive oil or grease lubrication systems. They are of two pieces, steel construction with viton o-ring seals. FD valves will serve 2, 3, 4 or 6 points of lubrication.
Application
For oil.
FL-42 Injectors are for single and manifold injectors are adjustable up to .003 cubic inches discharge per cycle. Each manifold includes two mounting clips and screws (1/4” – 20 thread x...
FL1 Injectors are positive displacement type. They have adjustable outputs and a visual indicator pin. They can supply one lubrication point, or several in combination with a progressive divider. All incorporate grease zerk...
Single and manifold injectors are adjustable up to .008 cubic inches discharge per cycle.
The pump FZ-A is designed as a single-piston pump with up to 12 outlets. It is predominantly intended for multiline - centralized lubrication systems. The pump is usually driven by the flange motor or by the machine to be...
The pump FZ-B is designed as a single-piston pump with max. 2 outlets. It is predominantly intended for multiline - centralized lubrication systems. The pump is usually driven by the flange motor or by the machine to be...
The L100P manual grease pump mainly composes a aluminum pump body and a heattreated steel piston which is driven by a vertical hand lever. Push down the lever, pump sucks, push back, the pump delivery grease to the outlet.
The L18P manual pump is perfectly adapted for use with resistance oil meter units (SLR) on medium size machines with no more than 75 lubrication points.
The L2P manual pump is perfectly adapted for use with resistance oil meter units (SLR) on small machines with no more than 10 lubrication points.
The L5P manual pump is perfectly adapted for use with resistance oil meter units (SLR) on medium size machines with no more than 30 lubrication points.
The M2500 series dividers are perfectly adapted for use in Bijur Farval progressive lubrication systems. The modular construction makes the system easy to install, and can be modified and maintained without removing any tubing....
The MPA micro pump is a pneumatically operated miniature piston pump used to deliver lubricant in small, metered quantities. This pump has applications in lubricating cutting tools during various machining operations including...
The multiport electrical grease pump is designed to feed progressive lubrication systems. It can be supplied with 1, 2 or 3 discharge elements with fixed or adjustable outputs. Differents voltages are available: continuous,...
The Oil Streak Sensor is designed to detect oil traces in the air tube, down to 5mm3/min. The product has been designed using a master and slave concept.
The distributors type PVB in building-block design are applied in small-size progressive lubrication systems representing a cost-saving and efficient solution for central supply of lubricating points with relatively small...
When underground trains, trams and railway trains run from one station to the next with a low noise level, this is often due to Railjet, the mobile wheel flange lubrication system of BIJURDELIMON. It reduces to a minimum friction...
Versatile application as pneumatically controlled 3/2-way valve, 2/2-way valve, directional control valve with pressure controlling and pressure relief valve. Usable for all types of lubricating systems but particularly suited...
The pressure relief valve is preferably used as safety valve to protect central lubrication systems from overpressure. It is suitable especially in total-loss systems.
For hydraulic systems, particularly dual-line centralized systems. For use SA-H as 3/2-way cock close both the outlets B.
For hydraulic systems, particularly dual-line centralized systems. For use SA-V as 3/2-way valve close outlet B.
The SC400 Controller is a full featured lubrication control, offering “two plus one” functionality: Two independent lubrication zones may be programmed with a single controller, plus control of one automatic reservoir fill...
The switching device SG-A is used as differential pressure switch in dual-line centralized lubrication system. When the differtial pressure is 50 bar and/or 100 bar, it releases a pulse for the reversion of the directional...
The spraymist unit is perfectly adapted for use with differents liquids for applications as metal cutting, drilling, grinding, cooling or wetting processes and chain lubrication. It comprises a filter with drain, a pressure...
StaTrack pump cabinets are employed in stationary track lubrication systems and represent the basic equipment for applying a special rail lubricant to the running surface of the rail heads, the flanks of the guard or side rails...
StaTrack pump cabinets are employed in stationary track lubrication systems and represent the basic equipment for applying a special rail lubricant to the running surface of the rail heads, the flanks of the guard or side rails...
The SURE 881 is a pneumatically operated piston pump intended for use in progressive lubricating systems. The pump is capable of flow rates of 85 cc/min up to 196 bar pressure. It may be used with greases from #000 to #1. The...
The Surefire automatic lubricator is a robust and reliable pump that can handle oil and soft grease. Its compact size is designed to fit your space requirements and lubrication demands. The Surefire lubricator is a self-contained...
The Surematic pump is a pneumatically operated piston pump, intended for use in progressive type, lubrication systems. Stroke of pump is adjustable from 1 to 8 cc, while output pressure is regulated by incoming air pressure and...
The TM-1 pump has a wild field of applications but is particularly suited to small machines with no more than about 20 lubrication points (see technical information). The TM-1 pump is interchangeable with the manual L5P, giving...
The TM5 pump has a wild field of applications but is particularly suited to small machines with no more than about 50 lubrication points. The TM5 pump is interchangeable with the manual L18P, giving customers the ability to...
The wide field of application of TMD 5 pump is particularly ideal for machines having up to around 50 lubrication points. The TMD 5 is interchangeable with the L 18P convenient for customers wishing to change from an automatic to...
The TP pump is a pneumatically operated, single acting, piston pump. Discharge capacity is adjustable from 0.57cc to 1.1 cc per stroke. A high pressure ratio of 50:1, offers high outlet pressures, suitable for even the most...
U-Block divider valves are specially designed for use in progressive lubrication systems. Several outlet configurations are available that allow you to tailor the divider valve to your lubrication specifications.
The VERSA III pump is an electrically operated gear pump intended for use in volumetric type (PDI) centralised lubrication systems. This compact unit comes with a 2L or 4L reservoir, has a low level switch and an oil pressure...
The ZE-E lubricant metering elements are designed for single-line centralized lubrication systems. The quantity of lubricant to be metered is delivered after each pressure stroke.
The injectors type ZEM (direct action) are perfectly adapted for use with volumetric system (PDI) for diverse applications.Their precise delivery and predetermined quantity helps ensure each lubrication point receives the proper...
The major element of a progressive system is the lubricant distributor. Distributors ZP-A are used to divide and meter lubricant in total loss central lubrication systems (oil, liquid grease and grease) and in oil recirculation...
Progressive group-lubrication distributors ZP-A/G are used in group lubrication systems where a lot of machines or plants, which are either of the same kind or similar to each other and erected in a hall, have to be supplied with...
The major element of a progressive system is the lubricant distributor. Distributors ZP-B are used to divide and meter lubricant in total loss central lubrication systems (oil, liquid grease and grease) and in oil recirculation...
Progressive group-lubrication distributors ZPB-G are used in group lubrication systems where a lot of machines or plants, which are either of the same kind or similar to each other and erected in a hall, have to be supplied with...
The major element of a progressive system is the lubricant distributor. Distributors ZP-C are used to divide and meter lubricant in total loss central lubrication systems (oil, liquid grease and grease) and in oil recirculation...
The major element of a progressive system is the lubricant distributor. Distributors ZP-D are used to divide and meter lubricant in total loss central lubrication systems (oil, liquid grease and grease) and in oil recirculation...
The distributors ZV-B are used for dual-line central lubrication systems for grease and for oil. Their function is to meter the lubricant and to press it through the lines to the lubrication points independently of back pressure.
The distributors ZV-C are used for dual-line central lubrication systems for grease and for oil. Their function is to meter the lubricant and to press it through the lines to the lubrication points independently of back pressure.
Browse products by