Location

USA

change

Pumps

Refine your search:
39900 Series Area Control Cabinet

The 39900 Series Area Control Cabinet consists of a DJ45 dual piston motor driven pump, reservoir with high-low reservoir level control valve, DR4 hydraulic reversing valve with manual shutoff valves, SS2200 controller and bulk...

AeroFlow Lubricator

AeroFlow Lubricators are pneumatically actuated piston pumps designed for use with single line parallel injector systems.

Airmatic Lubricator

Adaptable air operated unit can be used with all centralized lubrication types. Ideal for all sizes of machinery.

AirMax

The AirMax is a simple economical lubricator, ideally suitable for air-oil systems. The AirMax is supplied with a 3 liter reservoir, pressure gauge and oil inlet filter with the options of a oil pressure switch, low level switch,...

Barrel Pumps

Made with precision and corrosion resistant parts, high alloy materials and quality seals, barrel pumps are highly efficient with low noise and air consumption. Oil pumps available in 8, 10 and 16 GPM.

BL Lubricator

The BL Lubricator is a motor driven gear pump available with either a 12 or 24 VDC motor. These lubricators are fitted to 3 liter reservoirs and are designed primarily for use with mobile equipment. BL Lubricators are normally...

BM-B Lubricator

A versatile unit that can be used with injectors, series progressive divider valves or dual line systems. It is ideal for medium- and large-sized machinery, with a maximum working pressure is 5800 PSI. The BM-B is a...

BS-B Pump

The BS-B lubricator is used in cases where a lot of lubrication points shall centrally and reliably be supplied with lubricant. In connection with ZV-B distributors, the pump is predominantly used in dual-line lubrication...

Constant Level Oilers

The Denco Lubrication Oiler maintains a constant lubrication level in a bearing housing or gearbox automatically making up lubricant usage from its back-up reservoir.

CS1000 Stations

CS1000 stations store, control and supply the lubricant to systems. They can be used in non-return systems that service small- to medium-size equipment.

CS2000 Stations

CS2000 stations store, control and supply the lubricant to systems. Depending on reservoir size, they can be used in systems that service anything from small machine tools to large machinery in steel mills. Or from small to large...

CSK Lubricator

Designed for grease lubrication and driven by a DC motor, this lubricator is ideal for single line systems. There is a built-in controller which controls the pump to delivers the rated amount of lubricant to the lubrication point...

DA Lubricators

DA Lubricators are manual grease and oil, double-action piston high pressure pumps.

DC36 Stations

DC36 stations store, control and supply the lubricant to systems. The lubricant must be oil with a viscosity of not greater than 1900 SSU at 100 degrees F. DC36 stations can be used in systems that service equipment requiring oil...

DC41 Stations

DC41 stations have been designed to meet the rigorous requirements of heavy industry. They can supply either oil or grease to such installations as bar mills, billet mills, blast furnaces and sintering machines.

DPG Lubricator

The DPG Pneumatic Lubricator is an air-operated reciprocating lubricator that discharges a fixed amount of lubricant into systems during a lubrication cycle.

DS Series Lubricator

The DS Series motorized oil/grease pumps are piston discharge pumps driven by DC motor, controlled by a controller or PLC (not included). The DS pump has small-volume, large-output flow and power-off load relieving functions. It...

Dynamis Lubricator

The Dynamis Lubricator has been developed and designed to serve the user as a multi-function automatic lubricant pump. Thanks to its compact construction and the consistent implementation of the modular system, this pump can be...

Dynamis Maxx Lubricator

Dynamis Maxx Lubricators are electrically driven piston pumps designed for use with series

progressive systems. These lubricators can be fi tted with up to three independent or combined piston

elements providing positive...

Bijur Delimon's AC or DC Electric Barrel Pumps will replace the air or hydraulic operated pumps now used for lubrication system on mobile or stationary equipment.

FZ Series Lubricators

FZ-A and FZ-B are robust lubricators capable of delivering oil and grease in harsh and severe conditions. Adaptable to progressive systems and gear spray systems.

G Lubricator

The Type G lubricator is a sealed piston pump that can be fed from an independent oil reservoir.

G Lubricator (Mini)

The Mini G Lubricator is a push type piston pump and is operated by an external eccentric cam.

GPO Lubricator

The GPO Lubricator is a motor-driven gear pump that is designed for use with single line centralized lubricating systems utilizing progressive distributors or injectors. Standard features include: liquid level indicator, pressure...

HAP-P Lubricators

Push lever piston pump that develops significant discharge pressures to handle medium & large machinery.

HIP-P Lubricator

Pull handle piston pump. Adjustable outputs to adapt to various individual machines.

DSP Series Lubricators

The JS/JSP Series Lubricator motorized oil/grease pumps are piston discharge pumps driven by DC motor, controlled by a controller or PLC

Progressive/SLR and PDI versions are available.

KI Lubricator

The KI Lubricator one-shot lubricating system is pre-set by the machine manufacturer for best operation. These lubricators are spring discharge piston pumps mounted in a reservoir on the machine. Pulling out the tee handle to...

L100P Lubricator

The L100P Lubricator is a manual grease pump for Series Progressive systems.

L13 Lubricator

Perfectly suited for use with Positive Displacement Injector (PDI) systems. A single action manual piston pump with a robust plastic reservoir.

L18P Lubricator

High output push level adjustable piston pump. Handles up to 100 lube points.

L2P Lubricator

Pull action, fixed output piston pump. Avaliable for machine sump mounting or supplied complete with reservoir.

L5H Lubricator

The L5H Lubricator includes a spring return piston pump. When the tee-handle is fully raised, a predetermined volume of oil fills the cylinder and the pump spring is compressed. Releasing the handle forces oil into the...

XL5P Lubricator

The L5P Lubricator is a manual, one shot lubricator with a 1 pint reservoir.

LubeSite 200 Series Greasers

Polycarbonate reservoir & base for general applications where minimal vibration is encountered.

LubeSite 300 Series Greaser

Polycarbonate reservoir with metal base for use in applications with shock & vibration.

LubeSite 404 Greaser

Disposable feeder pre-filled with grease - no mess, no fuss unit for minimal vibration applications.

LubeSite 500 Series Greasers

Rugged metal base grease feeder for corrosive resistance applications where vibration is encountered.

LubeSite 704 Greaser

High temperature application grease feeder units available pre-filled with selected lubricants.

LubeSite ACP-5 Lubricator

Electric, motor-driven cyclic oilers are offered in a variety of fixed discharge times for popular single line resistance centralized lubrication systems. Discharge output is easily adjusted through setting device located in...

LubeSite Chain Oilers

Adjustable drip flow oiler with dispersing brush to extend chain life. Flat & round brushes available.

LubeSite Drip Oilers

Integral needle valve provides operator controlled drip feed rates. Built-in sight feed shows oil flows to bearings.

LubeSite Gravity Feed Oilers

Maintains a controlled oil level in oil lubricated bearings. Also used as an oil level indicator on reservoirs.

Lubesite MCP-5 Lubricator

This manual oiler for SLR systems is available in both left- and right-hand setups.

LubeSite Wick Oilers

Delivers precise oil feed to bearings. Various wick densities control flow.

Manual Grease Gun

Heavy duty hand operated pistol grip grease gun with cast iron pump head. All models accept standard 14 oz grease cartridges and can be bulk filled by suction.

Motor-driven Gear Pump

A motor-driven gear pump discharges oil at low operating pressures. Assembly is furnished with two discharge outlets and is normally used to deliver oil to individual areas on machine. Typically, the pump is mounted in machine...

The MultiPort II Lubricator is an electrically driven multiple outlet lubrication unit designed primarily for use with positive displacement injector(PDI) systems. These lubricators are available with 24 VDC motors which make...

The MultiPort II Lubricator is an electrically driven multiple outlet lubrication unit design primarily for use with progressive divider valve systems. These lubricators are available with 12 and 24 VDC motors which make them...

MultiPort Lubricator

Self-contained electric motor driven pump. Up to 3 outlets, adapts to all types of centralized grease systems.

MultiPort Mobile Lubricator

With a small installation footprint, this lubricator is a robust and economical solution for mobile equipment. With a small installation footprint, this lubricator is a robust and economical solution for mobile equipment.

The PulseFire lubricator is a hydraulically operated, spring return, piston pump.

SK-505 Lubricator

The SK-505 lubricator is a piston discharge pump activated by a small direct current (DC) electric motor. This model is normally used with progressive divider blocks for small and medium sized systems.

SKA881 Lubricator

The SKA881 Pneumatic Lubricator is an air-operated reciprocating lubricator that discharges a fixed amount of lubricant into systems during a lubrication cycle.

The SureFire II Lubricator is an automatic, robust and durable pump. Its compact size is designed to fit your space requirements and lubrication demands. The SureFire II Lubricator is a self-contained electric motor-driven gear...

SureFire PDI Lubricator (Single Phase, Controller)

The robust and reliable SureFire PDI automatic lubricator can pump oil and soft grease to as many as 100 lubrication points. Compatible with Positive Displacement Injector (PDI) systems.

SureFire SLR Lubricator (Three Phase)

The robust and reliable SureFire SLR automatic lubricator can pump oil and soft grease to as many as 100 lubrication points. Compatible with Single Line Resistance (SLR) systems.

SureMatic Lubricator

Adjustable output, pneumatic operated pump handles semi-fluid, soft & firm greases up to NLGI No. 2.

TM-1 Lubricator

TM-1 Lubricators are used with single line resistance type centralized lubricating systems. These systems utilize cyclic delivery meter units to proportion oil discharged from the lubricator.

TM-5 Lubricator

Fixed discharge cyclic pump, electric motor driven, compact unit incorporates adjustable discharge. Ideal for small machines - easily handles up to 10 or 50 lube points.

TMD-5 Lubricator

Fixed discharge cyclic pump, electric motor-driven units available in various reservoir capacities, broad range of cycle times offered, up to 30 lube points.

TP Lubricator

Used on central pumping stations with T30, T32 or T33 reservoirs. Also used in bulk oil installations without reservoirs. They are actuated by air or hydraulic power.

TS Lubricators

These lubricators serve machines having pneumatic or hydraulic power.

TTN Lubricator

TTN Lubricators are ideally suited for both on-road transport vehicles and off-road mobile machinery such as loaders, excavators, articulated trucks, graders, etc. These lubricators are designed to work in hostile conditions...

V3 Lubricator

A continuous delivery motor-driven gear pump ideal in single line resistance systems.

V5 Series Lubricator

Continuous output motor-driven gear pump with built-in by-pass valve is easily adjusted to meet the lube needs of a broad range of machinery.

Versa II PDI Lubricator

The Versa II PDI Lubricator is an automatic, robust and durable pump that can handle oil. Its compact size is designed to fit your space requirements and lubrication demands.

Versa II PROG Lubricator

The Versa II Progressive Lubricator is an automatic, robust and durable pump that can handle oil. Its compact size is designed to fit your space requirements and lubrication demands.

Versa II SLR Lubricator

The Versa II SLR Lubricator is an automatic, robust and durable pump that can handle oil. Its compact size is designed to fit your space requirements and lubrication demands.

YP-8 Lubricator

An automatic, pneumatic actuated lubricator designed for cyclic operation by the application of pressure pulses to the air supply connection.

Our brands

  • Bijur
  • Delimon
  • Farval
  • LubeSite Systems, Inc.
  • Delimon Denco Lubrications