Distribution Elements
The Series 1000 progressive divider valve manifold distributes and proportions incoming oil or grease to bearing points.
The Series 3000 divider valve manifold distributes and proportions incoming oil or grease to bearing points.
Designed for use in single line high pressure automatic grease systems, CXL2 Injectors deliver precise volumes of lubricant at predetermined intervals.
Dual line valves that are completely hydraulic in operation, will deliver either oil or grease, are fully and individually adjustable in regard to discharge quantity, and are equipped with operational indicators.
Modular dual line valves allow you to specify individual discharge amounts within a dual line block. Each module fits onto a manifold (up to 20 outlets per manifold) to give you the most versatile dual line solution in the...
Dual line valves that are completely hydraulic in operation, will deliver either oil or grease, are fully and individually adjustable in regard to discharge quantity, and are equipped with operational indicators.
The DR4 Reversing Valve alternates the flow of lubricant thru the lines of Dual Line systems so that lubricant is directed first to one supply line then the other, during system cycles. The reversing action is automatic,...
Designed for use with progressive oil or grease systems, these valves are of steel construction with Viton O-rings standard.
Higher injector outputs make these units well suited to satisfy lubrication needs of medium and large machines.
For the most demanding applications, the FL-11 can dispense grease up to NLGI No. 2. Units can be used with FL-32, FL-33 and FL-1 series injectors.
Single and manifold injectors are adjustable up to .008 cubic inches discharge per cycle.
Single and manifold injectors are adjustable up to .003 cubic inches discharge per cycle.
Single and manifold injectors are adjustable up to .003 cubic inches discharge per cycle.
Single and manifold injectors are adjustable up to .008 cubic inches discharge per cycle.
Higher injector outputs make these units well suited to satisfy lubrication needs of medium and large machines.
GXL Injectors are positive displacement spring loaded devices designed for use in an automatic centralized lubrication system.
The principal components of a progressive lubricating system. Modular construction makes these blocks easy to install, modify and maintain, without removing any tubing.
The principal components of a progressive lubricating system. Modular construction makes these blocks easy to install, modify and maintain, without removing any tubing.
The PVB divider manifold is designed for small-size series progressive lubrication systems. It is a cost efficient solution for supplying multiple lubrication points with relatively small volumes of oil and grease.
Accurately meters and dispenses lubricant to as many as 20 outlet lines at operating pressures up to 3600 psi, for mobile applications.
Quick Connect Meter Units are oil proportioning devices for cyclic systems. Each outlet of a lubricating system is controlled by a meter unit.
This manual lubrication kit delivers a positive measured shot of grease to each connected lubrication point through a single manually-fed grease fitting.
U-Block divider valves are specially designed for use in progressive lubrication systems. Several outlet configurations are available that allow you to tailor the divider valve to your lubrication specifications.
Vent Valve is used with FL Series Injectors to relieve system pressure back to reservoir after a lubrication cycle.
Z Series Injectors deliver a fixed pre-measured quantity of lubricant at the outlet connection during each discharge cycle.
The ZEM Series of positive displacement injectors (PDIs) delivers precise and controlled lubrication outputs that meet exact requirements for diverse applications.
For applications that need a direct connection to lubrication points, the Z-Series direct connect injectors deliver a precise discharge.
Browse products by