Miscellaneous
The Series 1000 progressive divider valve manifold distributes and proportions incoming oil or grease to bearing points.
The Series 3000 divider valve manifold distributes and proportions incoming oil or grease to bearing points.
The 39900 Series Area Control Cabinet consists of a DJ45 dual piston motor driven pump, reservoir with high-low reservoir level control valve, DR4 hydraulic reversing valve with manual shutoff valves, SS2200 controller and bulk...
AeroFlow Lubricators are pneumatically actuated piston pumps designed for use with single line parallel injector systems.
Adaptable air operated unit can be used with all centralized lubrication types. Ideal for all sizes of machinery.
Made with precision and corrosion resistant parts, high alloy materials and quality seals, barrel pumps are highly efficient with low noise and air consumption. Oil pumps available in 8, 10 and 16 GPM.
The Battery-powered Grease Gun is cordless and frees you from cumbersome cords or air hoses.
A versatile unit that can be used with injectors, series progressive divider valves or dual line systems. It is ideal for medium- and large-sized machinery, with a maximum working pressure is 5800 PSI. The BM-B is a...
Brake counters are used to initiate greasing cycles in a centralized lubrication system on equipment that lacks a continuous supply of electrical current.
Brush assemblies are suitable for lubricating various moving machine components and are ideal for low-heat applications.
The BS-B lubricator is used in cases where a lot of lubrication points shall centrally and reliably be supplied with lubricant. In connection with ZV-B distributors, the pump is predominantly used in dual-line lubrication...
The Denco Constant Level Oiler maintains a constant lubricant level in a bearing housing or gearbox automatically making up lubricant usage from its back-up reservoir.
CS1000 stations store, control and supply the lubricant to systems. They can be used in non-return systems that service small- to medium-size equipment.
CS2000 stations store, control and supply the lubricant to systems. Depending on reservoir size, they can be used in systems that service anything from small machine tools to large machinery in steel mills. Or from small to large...
Designed for grease lubrication and driven by a DC motor, this lubricator is ideal for single line systems. There is a built-in controller which controls the pump to delivers the rated amount of lubricant to the lubrication point...
Designed for use in single line high pressure automatic grease systems, CXL2 Injectors deliver precise volumes of lubricant at predetermined intervals.
DC36 stations store, control and supply the lubricant to systems. The lubricant must be oil with a viscosity of not greater than 1900 SSU at 100 degrees F. DC36 stations can be used in systems that service equipment requiring oil...
DC41 stations have been designed to meet the rigorous requirements of heavy industry. They can supply either oil or grease to such installations as bar mills, billet mills, blast furnaces and sintering machines.
Dual line valves that are completely hydraulic in operation, will deliver either oil or grease, are fully and individually adjustable in regard to discharge quantity, and are equipped with operational indicators.
Modular dual line valves allow you to specify individual discharge amounts within a dual line block. Each module fits onto a manifold (up to 20 outlets per manifold) to give you the most versatile dual line solution in the...
Dual line valves that are completely hydraulic in operation, will deliver either oil or grease, are fully and individually adjustable in regard to discharge quantity, and are equipped with operational indicators.
The DPG Pneumatic Lubricator is an air-operated reciprocating lubricator that discharges a fixed amount of lubricant into systems during a lubrication cycle.
The DR4 Reversing Valve alternates the flow of lubricant thru the lines of Dual Line systems so that lubricant is directed first to one supply line then the other, during system cycles. The reversing action is automatic,...
The DS Series motorized oil/grease pumps are piston discharge pumps driven by DC motor, controlled by a controller or PLC (not included). The DS pump has small-volume, large-output flow and power-off load relieving functions. It...
The DSP Series Lubricator is a motorized oil/grease piston discharge pump driven by DC motor, controlled by a controller or PLC (not included). The DSP Lubricator outputs oil or grease continuously through reciprocal piston...
The Dynamis Lubricator has been developed and designed to serve the user as a multi-function automatic lubricant pump. Thanks to its compact construction and the consistent implementation of the modular system, this pump can be...
Dynamis Maxx Lubricators are electrically driven piston pumps designed for use with series
progressive systems. These lubricators can be fi tted with up to three independent or combined piston
elements providing positive...
Designed for use with progressive oil or grease systems, these valves are of steel construction with Viton O-rings standard.
Higher injector outputs make these units well suited to satisfy lubrication needs of medium and large machines.
For the most demanding applications, the FL-11 can dispense grease up to NLGI No. 2. Units can be used with FL-32, FL-33 and FL-1 series injectors.
Single and manifold injectors are adjustable up to .008 cubic inches discharge per cycle.
Single and manifold injectors are adjustable up to .003 cubic inches discharge per cycle.
Single and manifold injectors are adjustable up to .003 cubic inches discharge per cycle.
Single and manifold injectors are adjustable up to .008 cubic inches discharge per cycle.
Higher injector outputs make these units well suited to satisfy lubrication needs of medium and large machines.
Pressurized dispensing system designed for maximum efficiency, accuracy, and control when dispensing virtually any fluid used in manufacturing or process industries.
FR20 Reversing Valves operate in conjunction with two pressure switches, alternating lubricant flow through DC41 end-of-line systems so that lubricant is directed first to one set of Dualine valve inlet ports and then the other,...
FZ-A and FZ-B are robust lubricators capable of delivering oil and grease in harsh and severe conditions. Adaptable to progressive systems and gear spray systems.
The Type G lubricator is a sealed piston pump that can be fed from an independent oil reservoir.
The Mini G Lubricator is a push type piston pump and is operated by an external eccentric cam.
The GPO Lubricator is a motor-driven gear pump that is designed for use with single line centralized lubricating systems utilizing progressive distributors or injectors. Standard features include: liquid level indicator, pressure...
GXL Injectors are positive displacement spring loaded devices designed for use in an automatic centralized lubrication system.
Push lever piston pump that develops significant discharge pressures to handle medium & large machinery.
The bowl and filter elements can easily be removed for cleaning or replacement.
Pull handle piston pump. Adjustable outputs to adapt to various individual machines.
System delivers high-efficiency lubrication and cooling for high-speed spindles and other surfaces requiring accurate oil deliveries.
The HyperFormance Chain Pin System is an economical lubricator package that delivers precise oil droplets to chain pins for improved machine performance.
In-line pressure filters are compact and easily serviced die-cast and are available in two sizes for 1” and 3” deep disposable porous metal filter elements.
In-line Pressure Filters provide a compact lightweight in-line filter for reliable economic protection of critical components. These In-line pressure filters are commonly used in air-oil panel assemblies.
Junctions, junction bars and junction headers are used in lubrication systems for easy branching of tubing lines from two to multiple outlets.
The KI Lubricator one-shot lubricating system is pre-set by the machine manufacturer for best operation. These lubricators are spring discharge piston pumps mounted in a reservoir on the machine. Pulling out the tee handle to...
Perfectly suited for use with Positive Displacement Injector (PDI) systems. A single action manual piston pump with a robust plastic reservoir.
Pull action, fixed output piston pump. Avaliable for machine sump mounting or supplied complete with reservoir.
The L5H Lubricator includes a spring return piston pump. When the tee-handle is fully raised, a predetermined volume of oil fills the cylinder and the pump spring is compressed. Releasing the handle forces oil into the...
The 55105 Lube Point Monitor is an accurate oval gear mechanism that incorporates two magnets into one of the oval gears. The body incorporates a reed switch which senses the magnet passing. Lubricant entering the 55105 causes...
The LubeLine Refill Kit is specifically designed to refill hard to reach LubeSite units.
Polycarbonate reservoir & base for general applications where minimal vibration is encountered.
Polycarbonate reservoir with metal base for use in applications with shock & vibration.
Disposable feeder pre-filled with grease - no mess, no fuss unit for minimal vibration applications.
Rugged metal base grease feeder for corrosive resistance applications where vibration is encountered.
High temperature application grease feeder units available pre-filled with selected lubricants.
Electric, motor-driven cyclic oilers are offered in a variety of fixed discharge times for popular single line resistance centralized lubrication systems. Discharge output is easily adjusted through setting device located in...
This cam makes small flow adjustments easier. The lock nut resists vibrations and maintains a preset flow. It has an easy to see lock on/lock off action with spring action to positively control the needle.
Adjustable drip flow oiler with dispersing brush to extend chain life. Flat & round brushes available.
Integral needle valve provides operator controlled drip feed rates. Built-in sight feed shows oil flows to bearings.
Maintains a controlled oil level in oil lubricated bearings. Also used as an oil level indicator on reservoirs.
This manual oiler for SLR systems is available in both left- and right-hand setups.
The SAVER line of economical oilers provide a low-cost alternative for those who require performance at a low price and don’t need the security of a metal base.
LubeSite’s accurate way to check liquid level in a closed tank. Both male and female models feature a large window on two sides for easy visual inspection, top venting for vertical mounting and a sight tube which is designed for...
The principal components of a progressive lubricating system. Modular construction makes these blocks easy to install, modify and maintain, without removing any tubing.
The principal components of a progressive lubricating system. Modular construction makes these blocks easy to install, modify and maintain, without removing any tubing.
Heavy duty hand operated pistol grip grease gun with cast iron pump head. All models accept standard 14 oz grease cartridges and can be bulk filled by suction.
Moly EP Synthetic Grease is a multipurpose, extreme pressure wide temperature range grease.
A motor-driven gear pump discharges oil at low operating pressures. Assembly is furnished with two discharge outlets and is normally used to deliver oil to individual areas on machine. Typically, the pump is mounted in machine...
The MPA micro pump is a pneumatically operated miniature piston pump used to deliver lubricant in small, metered quantities.
Self-contained electric motor driven pump. Up to 3 outlets, adapts to all types of centralized grease systems.
With a small installation footprint, this lubricator is a robust and economical solution for mobile equipment. With a small installation footprint, this lubricator is a robust and economical solution for mobile equipment.
Individually calibrated and adjustable, Oil Flow Meters regulate and monitor oil flow.
Oil Level Sight Plugs reflective “bulls eye” surfaces reflect light in the absence of any liquid, allowing liquid levels to be seen easily.
Resistance-type meter unit selection, complete with all necessary tubings and fittings.
Oil Recirculating Systems are not only used to pump oil to bearings or gears to lubricate them but also to purge them of wear debris and, if necessary, to remove heat introduced into the oil by power losses due to...
The new line of Oil Streak air-oil systems by Bijur Delimon combine the best of all worlds in a clean looking, precise, simple to use "plug & play" format, designed to outperform all competition in your most demanding high speed...
Pressure gauges are used as a convenient means of indicating pressure developed in the distribution system.
The PVB divider manifold is designed for small-size series progressive lubrication systems. It is a cost efficient solution for supplying multiple lubrication points with relatively small volumes of oil and grease.
Accurately meters and dispenses lubricant to as many as 20 outlet lines at operating pressures up to 3600 psi, for mobile applications.
Quick Connect Meter Units are oil proportioning devices for cyclic systems. Each outlet of a lubricating system is controlled by a meter unit.
When underground trains, trams and railway trains run from one station to the next with a low noise level, this is often due to Railjet, the mobile wheel flange lubrication system of BIJURDELIMON. It reduces to a minimum friction...
Air operated vacuum or gravity fed device collects leaking fluids from hydraulic seals and other moving points. Fluids are collected to a central reservoir for disposal or reuse. Models available for single or multiple point...
The SC400 Controller is a full featured lubrication control, offering “two plus one” functionality: Two independent lubrication zones may be programmed with a single controller, plus control of one automatic reservoir fill system.
The SK-505 lubricator is a piston discharge pump activated by a small direct current (DC) electric motor. This model is normally used with progressive divider blocks for small and medium sized systems.
The SKA881 Pneumatic Lubricator is an air-operated reciprocating lubricator that discharges a fixed amount of lubricant into systems during a lubrication cycle.
The SMAC Controller is a multi-purpose programmable controller used with industrial lubrication systems.
Electric controller with various timer and count based models available. This controller has the ability to detect abnormal operating situations.
The SMDC Controller is a multi-purpose programmable controller used with on-board mobile lubrication systems.
Bijur Delimon has a wide assortment of specialty fittings to make your lubrication system work properly.
The SPIN-REV Lubricator eliminates residual drift of oil fog or mist during operation.
Microprocessor-based programmable controller designed to operate single line and dual line central lubrication systems.
Microprocessor-based programmable controller designed to operate single line and dual line central lubrication systems.
StaTrack pump cabinets are employed in stationary track lubrication systems and represent the basic equipment for applying a special rail lubricant to the running surface of the rail heads, the flanks of the guard or side rails...
The robust and reliable SureFire PDI automatic lubricator can pump oil and soft grease to as many as 100 lubrication points. Compatible with Positive Displacement Injector (PDI) systems.
The robust and reliable SureFire SLR automatic lubricator can pump oil and soft grease to as many as 100 lubrication points. Compatible with Single Line Resistance (SLR) systems.
Adjustable output, pneumatic operated pump handles semi-fluid, soft & firm greases up to NLGI No. 2.
This manual lubrication kit delivers a positive measured shot of grease to each connected lubrication point through a single manually-fed grease fitting.
TM-1 Lubricators are used with single line resistance type centralized lubricating systems. These systems utilize cyclic delivery meter units to proportion oil discharged from the lubricator.
Fixed discharge cyclic pump, electric motor driven, compact unit incorporates adjustable discharge. Ideal for small machines - easily handles up to 10 or 50 lube points.
Fixed discharge cyclic pump, electric motor-driven units available in various reservoir capacities, broad range of cycle times offered, up to 30 lube points.
Used on central pumping stations with T30, T32 or T33 reservoirs. Also used in bulk oil installations without reservoirs. They are actuated by air or hydraulic power.
TTN Lubricators are ideally suited for both on-road transport vehicles and off-road mobile machinery such as loaders, excavators, articulated trucks, graders, etc. These lubricators are designed to work in hostile conditions...
U-Block divider valves are specially designed for use in progressive lubrication systems. Several outlet configurations are available that allow you to tailor the divider valve to your lubrication specifications.
Continuous output motor-driven gear pump with built-in by-pass valve is easily adjusted to meet the lube needs of a broad range of machinery.
Vent Valve is used with FL Series Injectors to relieve system pressure back to reservoir after a lubrication cycle.
The Versa II PDI Lubricator is an automatic, robust and durable pump that can handle oil. Its compact size is designed to fit your space requirements and lubrication demands.
The Versa II Progressive Lubricator is an automatic, robust and durable pump that can handle oil. Its compact size is designed to fit your space requirements and lubrication demands.
The Versa II SLR Lubricator is an automatic, robust and durable pump that can handle oil. Its compact size is designed to fit your space requirements and lubrication demands.
An automatic, pneumatic actuated lubricator designed for cyclic operation by the application of pressure pulses to the air supply connection.
Z Series Injectors deliver a fixed pre-measured quantity of lubricant at the outlet connection during each discharge cycle.
The ZEM Series of positive displacement injectors (PDIs) delivers precise and controlled lubrication outputs that meet exact requirements for diverse applications.
For applications that need a direct connection to lubrication points, the Z-Series direct connect injectors deliver a precise discharge.
Browse products by