Pulp and Paper
The Series 3000 divider valve manifold distributes and proportions incoming oil or grease to bearing points.
Adaptable air operated unit can be used with all centralized lubrication types. Ideal for all sizes of machinery.
Made with precision and corrosion resistant parts, high alloy materials and quality seals, barrel pumps are highly efficient with low noise and air consumption. Oil pumps available in 8, 10 and 16 GPM.
A versatile unit that can be used with injectors, series progressive divider valves or dual line systems. It is ideal for medium- and large-sized machinery, with a maximum working pressure is 5800 PSI. The BM-B is a...
The BS-B lubricator is used in cases where a lot of lubrication points shall centrally and reliably be supplied with lubricant. In connection with ZV-B distributors, the pump is predominantly used in dual-line lubrication...
Designed for grease lubrication and driven by a DC motor, this lubricator is ideal for single line systems. There is a built-in controller which controls the pump to delivers the rated amount of lubricant to the lubrication point...
DC36 stations store, control and supply the lubricant to systems. The lubricant must be oil with a viscosity of not greater than 1900 SSU at 100 degrees F. DC36 stations can be used in systems that service equipment requiring oil...
Dual line valves that are completely hydraulic in operation, will deliver either oil or grease, are fully and individually adjustable in regard to discharge quantity, and are equipped with operational indicators.
Modular dual line valves allow you to specify individual discharge amounts within a dual line block. Each module fits onto a manifold (up to 20 outlets per manifold) to give you the most versatile dual line solution in the...
Dual line valves that are completely hydraulic in operation, will deliver either oil or grease, are fully and individually adjustable in regard to discharge quantity, and are equipped with operational indicators.
The DR4 Reversing Valve alternates the flow of lubricant thru the lines of Dual Line systems so that lubricant is directed first to one supply line then the other, during system cycles. The reversing action is automatic,...
The DS Series motorized oil/grease pumps are piston discharge pumps driven by DC motor, controlled by a controller or PLC (not included). The DS pump has small-volume, large-output flow and power-off load relieving functions. It...
The DSP Series Lubricator is a motorized oil/grease piston discharge pump driven by DC motor, controlled by a controller or PLC (not included). The DSP Lubricator outputs oil or grease continuously through reciprocal piston...
The Dynamis Lubricator has been developed and designed to serve the user as a multi-function automatic lubricant pump. Thanks to its compact construction and the consistent implementation of the modular system, this pump can be...
FR20 Reversing Valves operate in conjunction with two pressure switches, alternating lubricant flow through DC41 end-of-line systems so that lubricant is directed first to one set of Dualine valve inlet ports and then the other,...
The GPO Lubricator is a motor-driven gear pump that is designed for use with single line centralized lubricating systems utilizing progressive distributors or injectors. Standard features include: liquid level indicator, pressure...
The bowl and filter elements can easily be removed for cleaning or replacement.
The 55105 Lube Point Monitor is an accurate oval gear mechanism that incorporates two magnets into one of the oval gears. The body incorporates a reed switch which senses the magnet passing. Lubricant entering the 55105 causes...
Pressure gauges are used as a convenient means of indicating pressure developed in the distribution system.
The PVB divider manifold is designed for small-size series progressive lubrication systems. It is a cost efficient solution for supplying multiple lubrication points with relatively small volumes of oil and grease.
The SC400 Controller is a full featured lubrication control, offering “two plus one” functionality: Two independent lubrication zones may be programmed with a single controller, plus control of one automatic reservoir fill system.
The SKA881 Pneumatic Lubricator is an air-operated reciprocating lubricator that discharges a fixed amount of lubricant into systems during a lubrication cycle.
Microprocessor-based programmable controller designed to operate single line and dual line central lubrication systems.
Continuous output motor-driven gear pump with built-in by-pass valve is easily adjusted to meet the lube needs of a broad range of machinery.
Browse products by